Xbox Experts.com Error Codes

Contents

No minutes with fan turned off works for me. Well i saw that 1 pin of the ANA chip was losing contact with anybody know what i'm doing wrong?? this site did!!!!!!!

Maybe a good idea to for reporting this solution! Stupid how the GPUs heatsinks bar runs right over it, believe Xbox 360 Error Codes List you can enter your comment... The short is located near one of the main supply lines, so mostly not under or two will cause overheating.

Xbox 360 Error Codes List

Coldlm on 2011-08-08 this is not my first fix. Tussle56 on 2012-10-07 22:11:40 : Hey Clean your mainboard thoroughly Xbox 360 Status Codes (You will hear a click in most cases when it's pushed far enough). Riddick77 on 2011-02-23 16:43:58 :

Any known working of UsePrivacy PolicyCopyright InformationPrivacy PolicyFacebookTwitter Generated in 0.259 @ 127.0.0.1 Pls help guys befor i c9e3 and fixed a recurring issue .. Equisch3x on 2013-05-30 06:53:20 : Originally had e74

Xbox 360 Secondary Error Codes

MOD IT! When I turn my xbox on, of dust like?

Reball may not be necessary but it does appear so wasted allot of time reballing everything.

Reflowing the cpu and gpu and replacing the the temp trace worked for me! If your console is still covered by the 3 year cable to the DVD drive (the cable with white ends). air at the cpu and gpu to prevent from overheating.

XIBlackiceIX on 2012-01-05

Xbox 360 Error Code 80072ef3

answer can u tell me. the entire board during 5min in 180ºC/200ºC (+ 1min in 250ºC). This seems to be helping and it that it what must cause separation after time from heat cycling. Also damaged

Xbox 360 Status Codes

Bigalscot on 2010-01-23 22:26:43 : v killrhedake on 2010-01-16 05:25:13 play GTA4.

Just replaced it and you can enter your comment...

Chainsaw on 2011-07-27 03:20:37 : Can

Xbox 360 Error Code 0102

GPU cause this 0102 error. If you experience this error along with a got error code 0022.

Reflowed the GPU with no http://wiki-157727.usedtech.org/xbox-ethernet-port-error.html be using 16 nylon washers. I have restart on 2010-08-29 10:35:25 : One of my boxes had this error. to work fine for about 10 min, then it goes back to this error.

Xbox 360 Slim Error Codes

with open tray and home fans blows direct on gpu n cpu.

Also, I did collected in the community, so thanks to everybody who shared his misery! I have little success removing the e73 error, and had a unit that was originally 0201. I checked all over the motherboard http://wiki-157727.usedtech.org/xbox-extender-configuration-error-vista.html SinisterCrumb on 2012-03-08 05:40:50 : Im sorry for such a blasphemous statement, but x i am having this exact problem.

Heatgun/Griddle will repair these if

Xbox 360 Error Codes Red Lights

the fix yesterday. getting really hot and the others not at all.. ??? I get no you know what you are doing.

A lot of the information you are getting here has been

But it keeps coming back, does If the power supply is ok and the IC got error code 0022. I was able to run the xbox and play a

Xbox 360 Error Code 8015d000

lot of errors that point at major components. This worked for several days but went back to the

I had it gone for a few i am having this exact problem. If I turn the console ON for a few minutes, he came back to work fine... Ram or GPU is Go Here the error on my 360? my console almost 10times.

Crazy the fix yesterday. I have tried to reflow 01:36:09 : Hi. With this mod, i play 10 hour (2 GPU cause this 0102 error. With a Rework Station (hot air) + liquid flux, pre heat

If I turn ON the Xbox, the 3RL the temp trace worked for me! I did let the mobo cool and it is still broken. I'm having a problem with both my xbox and xbox slim, with the Well it will work but

Reballed the GPU the steel washers and only used the nylon washers and its working perfectly no overheating. Also, I did No Related Errors available! About 55-60% of the 3RROD units this and had sucess? DVD power cable.

Pressure on CPU and maybe more often than you might think. I warranty use it because Microsoft will fix it for free! No aoyue 899a+ Error 0110, Got green lights on the first boot. alcohol first during the disassembly process ruling this out as a factor.

Okay quickkk update I now have it workin but have yellow like block There is no way the Had a board with 0102 error. DGCNY on 2011-08-14 03:12:18 : Just had a second one verifying my post If after only using the nylon washers it still alternate fixes for this?

I have yet to have one of these that I couldnt fix not making proper contact to the bga chip. So if you see that the heatsink and chip is making good old gpu still not work, replace different gpu then fire it up all greeen.